|
April 15th, 2012, 08:41 PM
|
#161 |
|
2010 Donating Member
Join Date: Sep 2003
Location: Ottawa Ontario
Posts: 3,827
|
__________________
|
|
|
|
April 16th, 2012, 02:09 PM
|
#162 |
|
Officer
Join Date: May 2002
Location: Westside
Posts: 10,927
|
Much sexy bro!
__________________
2001 Mazda MP3 1st HiBoost kit in the club! 1993 Mazda Protegé GT 1st V6 Protegé in the club! 1995 Mazda Miata M-Edition 1st Miata M-Edition in the club! My TOprotege.com Feedback | My CarDomain Sites | WESTSIDE      
|
|
|
|
|
April 16th, 2012, 04:16 PM
|
#163 |
|
TOP Alumni
Join Date: Nov 2003
Location: Westside
Posts: 17,435
|
Nice indeed! Great to finally see that 505 mani mounted and ready to be put to good use!
__________________
CrazyCaker | Joe | '02 P5 Turbo / '06 Mazda5 GT / '10 Mustang GT / '12 Grand Caravan Crew+ | Westside! |
|
|
|
|
April 18th, 2012, 01:01 PM
|
#164 |
|
2010 Donating Member
Join Date: Sep 2003
Location: Ottawa Ontario
Posts: 3,827
|
Information for the 65mm BBK Mustang Throttle Body Modification.
The TB takes the Mustang TPS TPS Part Number #DY-967 F4SZ-9B989-AA and Wire Kit Part Number WPT-993 1U2Z-14S411-AFB They require an aftermarket EMS such as a Haltech or AEM.  EDIT: Wanted to add that you will need 2x M5 1.0 x 25mm Long bolts.. You can get a set of Titanium ones that weigh nothing on E-Bay for under $10.00 Last edited by Brian MP5T; April 18th, 2012 at 04:39 PM. |
|
|
|
|
April 19th, 2012, 09:13 PM
|
#165 |
|
2010 Donating Member
Join Date: Sep 2003
Location: Ottawa Ontario
Posts: 3,827
|
So the Wastegate is Liquid Cooled.
The wastegate is fed by an AN4 Steel Line, but it goes near the Manifold and Downpipe. The Lines are being protected by a Silicon Heat Sleeve. It is good for 1700 Deg F Same thing on all of the lines including the Oil Feed to the turbo..  
|
|
|
|
|
April 20th, 2012, 08:53 AM
|
#166 |
|
2010 Donating Member
Join Date: Sep 2003
Location: Ottawa Ontario
Posts: 3,827
|
No more...
Power Steering Air Conditioner Water Pump... So the Belt looks like this now... 27.5" Long... 
|
|
|
|
|
April 20th, 2012, 01:15 PM
|
#167 |
|
2010 Donating Member
Join Date: Sep 2003
Location: Ottawa Ontario
Posts: 3,827
|
BTW: UPDATES!!!
   
|
|
|
|
|
April 20th, 2012, 02:06 PM
|
#168 |
|
TOP Alumni
Join Date: Dec 2004
Location: WESTSIDE
Posts: 6,349
|
Nice! looks like clearance will be tight for your downpipe with the dump tube there.
ps. heatshield is sexy. custom fab?
__________________
Ricecooker aka Christian | WESTSIDE |I miss my Red P5 | My Feedback | Retired VP & former Westside Rep. PPC - Stage 2 plus - protuned 
|
|
|
|
|
April 20th, 2012, 02:39 PM
|
#169 |
|
Members
Join Date: Jul 2010
Location: Luskville,Quebec
Posts: 123
|
So you got a belt for the alt? I guess you wont know till you fire it up if it all works out.
__________________
2003.5 Mazdaspeed protege/stock(for now) 2001 Mazda Protege turbo@ 0psi/crushed 1995 Eagle Talon Tsi @10psi/wifes car 1992 Toyota Soarer @12psi/Daily 1990 Volvo 740 wagon @15psi/project drift? |
|
|
|
|
April 22nd, 2012, 05:43 AM
|
#170 |
|
2010 Donating Member
Join Date: Sep 2003
Location: Ottawa Ontario
Posts: 3,827
|
Rolled the car out to get the floor in the garage cleaned...
The GT30 sits Center-line. It was the first time I was able to see the turbo from a distance because it had always been in the garage. 
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
