candy paint

pro5dippin · March 31st, 2012, 05:04 PM

i havent been able to contact paint circuit yet regarding candy paint.

anyone know where i can pick up candy paint in a spray bomb.

these are the two options.

viper_707 · March 31st, 2012, 05:49 PM

http://www.alsacorp.com/products/kil...andy/candy.htm

this is the only place i know where u can get candy in a can.. but i dont think it would be worth it. for the amount youd need to even produce the color you need atleast 8 coats of candy. that would be alot of cans to do 4 wheels. plus the paint to go under the candy.

pro5dippin · March 31st, 2012, 05:59 PM

another thing i was looking at was vht anozdized.

on none chrome wheels there is a silver basecoat then a purple topcoat.
i figured a couple coats of base followed by 2-3 coats of the purp followed by 2-3 coats of clear.

or this

i like the sounds of this one.

prime with a black primer or basecoat(i'll do 2 coats)
lay down 2-3 light coats of colorshift(i'll be doing 3-5 coats)
lay clear coat if you choose too.(2-3 lights coats)

March 31st, 2012, 05:04 PM	#1
pro5dippin Members Join Date: May 2009 Location: SCARBOROUGH Posts: 2,143	candy paint i havent been able to contact paint circuit yet regarding candy paint. anyone know where i can pick up candy paint in a spray bomb. these are the two options. __________________ "COPENHAGEN? THATS UP NORTH RIGHT?

March 31st, 2012, 05:49 PM	#2
viper_707 Members Join Date: Mar 2004 Location: Kitchener Posts: 2,429	http://www.alsacorp.com/products/kil...andy/candy.htm this is the only place i know where u can get candy in a can.. but i dont think it would be worth it. for the amount youd need to even produce the color you need atleast 8 coats of candy. that would be alot of cans to do 4 wheels. plus the paint to go under the candy. __________________ A smart man covers his ass, a wise man leaves his pants on. Devon 2002 phantom protege5 K-sport coilovers, mazdaspeed sway bar kit Hawk pads, stainless steel brake lines, tommotorsports catback, awr engine mounts, exedy clutch, mazdaspeed flywheel, medievil lightwieght pulleys, mazdaspeed short shifter, corksport stailess steel clutch line, corksport exhaust hangers, optima redtop, awr sway bar endlinks, thermo block intake and throttle body spacers, nyloil shifter bushings. 1990 black protege gt- reconditioning 1992 Red Protege DX- rip Look for me in and around Kitchener

March 31st, 2012, 05:59 PM	#3
pro5dippin Members Join Date: May 2009 Location: SCARBOROUGH Posts: 2,143	another thing i was looking at was vht anozdized. on none chrome wheels there is a silver basecoat then a purple topcoat. i figured a couple coats of base followed by 2-3 coats of the purp followed by 2-3 coats of clear. or this i like the sounds of this one. prime with a black primer or basecoat(i'll do 2 coats) lay down 2-3 light coats of colorshift(i'll be doing 3-5 coats) lay clear coat if you choose too.(2-3 lights coats) Last edited by pro5dippin; March 31st, 2012 at 06:59 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode