PDA

View Full Version : DDM Tunning HIDs

mikeyS.S
July 26th, 2011, 10:32 AM
I wanted to pick up a set for my Mazdaspeed Protege and my gfs 2004 Mazda 3 hatch... Not to sure as to what ill be needing to complete the order.. Can any one let me know what is good for both cars and what will be needed?


Mazdaspeed Protege will have retrofitted projector lights.

2004 Mazda 3 will be stock.

HELP PLS

Thanks
Mike
madeinhk
July 26th, 2011, 11:51 AM
your MSP has retrofitted lights...depends what knd of projectors they are so can't answer that

your g/f's mazda 3 will require H7 low beams, the first gen mazda 3's also uses low beams as DRL, so you will either need a relay kit or disable your DRLs.
mikeyS.S
July 27th, 2011, 02:47 AM
[QUOTE=madeinhk;815915]your MSP has retrofitted lights...depends what knd of projectors they are so can't answer that

my retrofits were done by MattV Retrofits on the U.S forum... Im assuming I have to use whatever stock is... and that would be H4 Hi/Low... would i need harness or anything other than the HID kit?

Thanks
Mike
RicecookerP5
July 27th, 2011, 02:02 PM
depends on what projectors were used. valeo, tsx, fx35 etc. could range from h1 type or d1s, d2s, d2r....
madeinhk
July 27th, 2011, 03:04 PM
nopeee, the kit comes with harness, its just proper bulb type to fit into the projector, if its H4, then its H4 hi/low.
RicecookerP5
July 27th, 2011, 03:14 PM
nopeee, the kit comes with harness, its just proper bulb type to fit into the projector, if its H4, then its H4 hi/low.

yeah, so anyway...

Find out what projectors were used. You could take the advice above, but don't.
e2wJunglist
July 27th, 2011, 03:19 PM
i lol'd a bit.
mikeyS.S
July 29th, 2011, 02:58 AM
soo according to MattV who did these retrofits, i need a H1 HID kit pair with a H4 wiring harness.. lol