Dark night project

[Demzz23]

Projet Demzz23

http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/presentation.jpg


Car description when I bought


Engine : 1.6L ZL

Tire: 4 season on black iron
Transmission: standard
Hp: ???
Paint: Oem Black
Windshield: broke side to side


Futur Modification
Exterior
- Paint Black Sparckling 35N et green lime Snakeskin chrysler PGS
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/peintureverte.jpg
- front conversion 2001 +
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/hood2001.jpg
- Headlight blackhousing P5 2003
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/driversideheadlight.jpg
- Bodykit Extreme Dimensions Bc-2
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/frontbumper.jpg http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/sideskirt.jpg http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/rearbumper.jpg

- Spoiler Megan racing MR-type carbon fiber CFS-MR55
- New Windshield



Interior
- Gauge Autometer Phantom 2 (oil pressure, Vacuum&boost, Narrowband)
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/gauge.jpg

- Steering P5
- Cluster Protégé 1st GEN



Engine


- Botom end Bp26 Big crank
- Head BP05 new of 2008 et valve brand new 2010[/FONT]
- Distri BP05
- head cam Bp26
- Intake manifold Bp26 ported
- FC RX-7 injectors(460cc) flow tested 2010
- top line rebuilt kit
- MLS 4 ply head gasket
- Cold air intake injen ou weapon R
- Eagle ESP H-Beam rods
- ARP bolt rod
- J.E pistons .20 overbore, 9:1 CR
- J.E rings
- FUL RACE ACL bearing
- ACL thrust washer
- new oem oil pump
- new oem waterpump
- mithuboshi timing belt
- Exhaust manifold custom
- Complete Engine mounts AWR
- Head Stud ARP
- glass beaded oil pan
- FPR
- rebuilded alternator 2009
-ps pumps and all straps 2010
- Hose rad Summit Racing
- Rad corksport aluminium
- Intercooler R34 GTR 3`` + piping 2.5``
- Blow off valve SSQV 2.5``
- Muffler Greedy SP2
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/muffler2.jpg http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/muffler1.jpg http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/muffler3.jpg
- Turbo Garette Gt2560R (I change for GT30 or 35)
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/turboGt2560R-1.jpg
-wallbro 255 hlp
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/pumpgaswallbro.jpg

Mangement
- megasquirt 1 v3.0(flatshift, launch control,spark cut,4Bar big daddy map sensor,silver welds)
- fully customised engine harness/plugnplay
- MSD 6a ignition box
- MSD tach adaptor
- MSD coil blaser


Transmission
- Tranny E153 toyota solara 2000 V6 ou Camry V6 2000



Suspension


- Tein Super street Coilover
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/coilovertein.jpg
- Front strut bar MSP
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/strubar.jpg


- Front swaybar racing beat
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/swaybaravant.jpg
- Eibach front/rear camber bolt
- Crossmember, link lateral, spindle/hub P5

http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/linklateral.jpg http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/conversion5bolts.jpg

- Rear sway bar Progress Technology

http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/swaybararriere.jpg

- End link AWR ajustable
- Tie rod end






Brake

- Front Big brake Brembo 4 pistons mazdaspeed 6 SS brake line
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/frontbrake2.jpg http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/frontbrake.jpg http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/caliperbrembo.jpg
- Rear MX6 V6 pad, rotor, caliper
http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/brakepadmx6.jpg http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/calipermx6.jpg http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/reardiscbrake.jpg

- Rear bake line rubber MX6 V6

Wheel and tire

- Falken 215/35R18


- Mag RX8 18''
http://i470.photobucket.com/albums/rr62/demzz23/DSCF2853.jpg
(http://i470.photobucket.com/albums/rr62/demzz23/DSCF2853.jpg)

[Demzz23]

sorry for my english
i'm from Gatineau Québec

[Demzz23]

http://i470.photobucket.com/albums/rr62/demzz23/projet%20char/_SC_0120.jpg

http://i470.photobucket.com/albums/rr62/demzz23/Projet%20Monster/DSCF1567.jpg

[Azi]

that is a nice build you have going there. Please replace the narrowband for a wideband sensor.

[fLaPjAk]

Nice!

Depending on how low you go, you will have a problem with the PROGRESS hitting the P5 link laterals...

If you don't go lower than 2" then you should be ok :)

I had the problem with lower than 2" and had to sell the Progress

[Myk]

Wow, nice project. I like the Brembo kit!

[Demzz23]

that is a nice build you have going there. Please replace the narrowband for a wideband sensor.

yes is in my plan
I search for a narrowband autometer phantom II

[Demzz23]

Nice!

Depending on how low you go, you will have a problem with the PROGRESS hitting the P5 link laterals...

If you don't go lower than 2" then you should be ok :)

I had the problem with lower than 2" and had to sell the Progress


I go for 1.8 inch of drop
with the Bc-2 is very low

[dead_cactus]

Nice build. Looking forward to seeing the progress.

[fLaPjAk]

excellent!!! can't wait to see the final build! good luck :D

I go for 1.8 inch of drop
with the Bc-2 is very low

[Jako13]

Digging the green man. Lol. Caint wait to see what It looks like

[Demzz23]

I received my complete engine sunday 12 december
I post some picture sunday

[Demzz23]

My engine
http://i470.photobucket.com/albums/rr62/demzz23/e7449311.jpg

Megasquirt
http://i470.photobucket.com/albums/rr62/demzz23/3ff69762.jpg

Before i put the engine in the hole
I change all vaccum line and rad line