View Full Version : airbagged P5 - nice
lizard
August 27th, 2002, 01:11 PM
Check it out P5 with aribags - From quebec cluc
P5 with airbags (http://membres.lycos.fr/phpcpq/membres/couts/Couts.jpg)
Protege5 Kid
August 27th, 2002, 01:19 PM
do you mean AirRide? does it really get that low
or is this a Photo shop thing?
Protegelover
August 27th, 2002, 01:20 PM
Sweet Protege5!!! http://msg.toprotege.com/iB_html/non-cgi/emoticons/wow.gif
Thats lowQ http://msg.toprotege.com/iB_html/non-cgi/emoticons/wow.gif
CarDemon
August 27th, 2002, 02:11 PM
When our regular cars get that low it gets very unattractive. I would prefer to see an older caddillac and impala like those in the Rap videos.
Just my wee opinion.
markque
August 27th, 2002, 02:16 PM
Sweet??? I beg to differ. That car looks like it has broken springs! Reminds me of some Chevy Chevettes back about 20 years that were driven into the ground - they looked like that.
I'll stick with the stock wheels and suspension - nuttin' wrong with dem! If anything, I'd prefer if the car sat higher in stock form.
Heaven help the guy if he gets detoured in a construction zone with others barking up the rear. After hundreds of dollars of plastic parts ripped off (his stock GFX kit), he'd be cryin' and the others laughing! Not to mention any vulnerable exhaust components, parking brake cables, etc.
I shudder to think how some of these cars have lost their everyday utilitarianism. Fine in a perfect world with roads as smooth as butter...
Mark http://msg.toprotege.com/iB_html/non-cgi/emoticons/smile.gif
cruisinblackp5
August 27th, 2002, 02:20 PM
He would probably raise it up to drive and for sure all the way up in construction and bumpy roads.
Protege5 Kid
August 27th, 2002, 02:24 PM
So this picture is real then?
speedracer
August 27th, 2002, 02:30 PM
http://msg.toprotege.com/iB_html/non-cgi/emoticons/bs.gif
PHOTOCHOP!! The rims are yellow and the front wheel area is very blurry. To get the front that low you would need more then airbags. You would have to do a complete body drop in the front. The front wheels are only a couple inches below the hood line. Try to find some more pics of this car.
Greg
Protege5girl
August 27th, 2002, 03:05 PM
it is photoshopped
lizard
August 27th, 2002, 04:26 PM
Well after seeing that custome painted P5 with 19" rims I did not give this one a closer inspection.
IT may be photoshop. I can see the front wheels are turned a bit which wold probably not allow dropping it all the way.
The yellow rims and windows appeared genuine.
Any way i think its possible to get it that way.
ReMuXieD
August 27th, 2002, 10:33 PM
its photoshopped...
if you look at the rear wheel and the rear bumper, u can see like 3 - inch ground clearance, but if the wheels are taht high up, the car is impossible to have that much clearance
pawood
August 27th, 2002, 11:15 PM
I'm dating myself again, but... have any of you ever seen a French car called the Citroen? It had a completely hydraulic suspension which you could adjust. The first ones has 63 hp, but because of the body shape (they looked like a catfish) and the ability to lower themselves to 3" ground clearance, they could travel at well over 100 mph! Of course the 0 to 60 time was over 27 seconds.
These cars there absolute pigs when it came to maintenance!!
The most elegant of these models was the 1973 Citroen Masseratti. It had all the problems PLUS a hybrid Italian sportscar motor!
And yes... I agree... that pic ain't real!
Protege5 Kid
August 28th, 2002, 07:14 AM
I know that car Pawood. Didn't Citroen make a
car that could still drive, even if it had a flat?
ToLowMP5
September 11th, 2002, 11:00 PM
heres my p5 with air ride that pic could be real if the car was floating the car would sit on the ground with the wheels that high in the fender and the pic there is at least 6-8 inches of clearance from the ground
lizard
September 11th, 2002, 11:09 PM
Hey ToLowmp5
could you post some pics showing the lowest (sit on the ground) and the highest that your ride will go?
Also please post how much the setup has cost you.
THanks
L:>~
ToLowMP5
September 11th, 2002, 11:30 PM
heres a pic comparing it to a stock p5 when it is at the top it is stock height
http://www.imagestation.com/picture/sraid31/p6b4ddfdf3cb2c46b863259cbfb848b9f/fd4845e3.jpg
it cost around $3400 for parts and to get it installed some where look at spending $1000 i installed it with my dad saved my self a bit of money but it took 3 days staight of work to get it in working order stil need to finish the setup of the parts in the trunk
Eds mp5
September 12th, 2002, 08:07 AM
hey looks pretty sweet. Hows the ride? Do you have the valves that exchange the air between the sides so that when cornering you don't lose air pressure?
Can you make it bounce??? How much room did the Air tanks take up in the back of the trunk?
Thanks id love to see it one day, looks like i missed you at BK.
Ed
ToLowMP5
September 12th, 2002, 01:20 PM
the ride i almost stock i don't have any valves but i don't losee air pressure either the tank doesn't take up that much it about ten inches wide by 33 inches long so very little space is used i'll probally come to the next meet hopefully with it looking a little better as my trunk was full with work crap
jali-p5
September 12th, 2002, 01:46 PM
submit, submit, submit, submit.......damn it why won't it submit?!?! http://msg.toprotege.com/iB_html/non-cgi/emoticons/crazy.gif
got a little trigger happy there huh ed??
ToLowMP5
September 12th, 2002, 05:42 PM
http://www.imagestation.com/picture/sraid31/p61756497975d2eb194cb33b8c6fc194b/fd47cd84.jpg
http://www.imagestation.com/picture/sraid31/p01fc169f473b08301375df28440398eb/fd47cd83.jpg
http://www.imagestation.com/picture/sraid31/p04cd621c3e5c4fd40896e6e1e677f662/fd47cd81.jpg
http://www.imagestation.com/picture/sraid31/p94068527e4832c437aac67f3f6838c9a/fd47cd7e.jpg
Eds mp5
September 12th, 2002, 08:05 PM
kept on getting error messages... ans then when i looked, a whole bunch.. haah. oh well, sorry for the quad.. post!
Ed
protegedude
September 13th, 2002, 04:55 PM
Looks awesome, I want to do the same to my sedan(2000) is there a kit available or do you have to get each part individually or fabricate anything?
protegedude
September 13th, 2002, 04:55 PM
Looks awesome, I want to do the same to my sedan(2000) is there a kit available or do you have to get each part individually or fabricate anything?
MixedAznBoy
September 22nd, 2002, 06:19 PM
im getting airride for my sedan next year.. how much did dat one cost? the place i went to is charging me a little less then 2 grand... i dunno about tax and crap though.. so im still decidin any suggestions?
MixedAznBoy
September 22nd, 2002, 06:24 PM
i dunno if my last msg submitted im kinda confused but some guy offered me 3000 grand plus tax, but its in the states. is there any good places i can check out near richmond hill for airride...
tolowmp5 ur car is AMAZING!!! omg *drool*
lizard
September 22nd, 2002, 07:44 PM
Do the pics above show the full range of hight adjustment or can you get it higher like the mini trucks and caddy's with the jacked up look?
Paul
vBulletin® v3.8.2, Copyright ©2000-2012, Jelsoft Enterprises Ltd.