stero kit..

[mkmk]

where can i buy a car deck kit..for my mazda?..every time i intall it it pops out...so i want to use the installation kit and do it...but id idn't find any...i didn't find any mazdas...is under another name or something?...

i searched future,best,wallmart,canadian tire everythinf...

[burlingtonprotege]

they are at fs and bb just gotta ask them.. around $30 which is total bs but what can you do

[Kansei]

dude get the OEM one, it's WAAAY better. it lets you use the rubber stud that your stereo may have come with, it mounts on the rail behind the radio to give support.

I don't have my parts guide on this laptop though, I'll go grab the other and check for you.

It's what the Protege MP3 and the MSP came with stock. it consists of a bar (with two screws and two clips) and a pocket. It lets you put the stereo in the bottom or top half, or you can just use the bar and put gauges or something else in.

[Kansei]

Bar: TA06-66-9B1 MSRP 19.85USD onlinemazdaparts.com 15.80USD
Pocket: BJ1H-66-9M0 MSRP 110.15USD onlinemazdaparts.com 88.12USD (!)

still lookin for the screws and clips.. but you can easily grab two machine screws, lock nuts, and nuts to mount it.

You can forgo the pocket and get just a cover instead.

Buy the pocket used off someone on the U.S. boards. I know I sold mine for 40 or 45USD on there.

[Kansei]

If you just want a plastic cover..

b03a-66-9m0 - 8.80USD MSRP, 7.04USD onlinemazdaparts.com
here's the screws to install the bracket: 998650516b (2 of them needed) --they're like a dollar each.
I'm still trying to decipher the numbers for the clip on the parts guide.

edit:
found it!
b09260408 (2x) 0.56USD on onlinemazdaparts.com

[mkmk]

when i took out the front part on my stock stero i saw 2 screws on eahc side holding this clips in thats attached to the cassest player..lol.....can i use those clips and attach it to my car deck?....best buy dosen't have it...i checked....2x...
i also don't want to order any parts..any local stores...
Kansie i know what your talking about...i tried that..i used it..i had it set on top and bottem and even middle...still it poped out...maybe i'm doing something wrong...hm...

i have the stock slips and nails...just need a method of installing it without it popping out...when i press a button..

[Kansei]

when i took out the front part on my stock stero i saw 2 screws on eahc side holding this clips in thats attached to the cassest player..lol.....can i use those clips and attach it to my car deck?....best buy dosen't have it...i checked....2x...
i also don't want to order any parts..any local stores...
Kansie i know what your talking about...i tried that..i used it..i had it set on top and bottem and even middle...still it poped out...maybe i'm doing something wrong...hm...

If your unit isn't anchored in the rear, that'll happen. You need a stud and the rubber piece off the back of your stock radio to help support it.

You don't have a sleeve or anything holding it in place in the front?