my 91 low pro

[.miKEy.]

just installed the lowering springs i got from progt91 here are a few pics...http://i67.photobucket.com/albums/h299/miKEy__2006/P8291549.jpg
thats it lowered
http://i67.photobucket.com/albums/h299/miKEy__2006/P8291550.jpg
back gap (i know its dirty washing it tomorrow)
http://i67.photobucket.com/albums/h299/miKEy__2006/P8291548.jpg
front gap...

[.miKEy.]

these are my subs....
http://i67.photobucket.com/albums/h299/miKEy__2006/P8291541.jpg

http://i67.photobucket.com/albums/h299/miKEy__2006/P8291542.jpg

http://i67.photobucket.com/albums/h299/miKEy__2006/P8291546.jpg

[y2jay]

dang.. how much does that box weigh??

[.miKEy.]

well with the subs and amp inside... about 120lbs im guessing... its a two person lift for sure

[Gen1GT]

I command you to wash that bitch! :p (don't forget inside the wheels)

[Mike_Moss]

dang.. how much does that box weigh??It balances out since he doesn't carry passengers in the rear seat. ;)


Lookin' good, Mike!

[viper_707]

holy sub box batman. looks good. its low, does does it handle??? ;)

[y2jay]

[quote=mike_moss]It balances out since he doesn't carry passengers in the rear seat. ;)[quote]

ah, quite true!

[.miKEy.]

it handles pretty good still gotta go for a 4 wheel allignment tomorrow but its pretty good so far havent had much of a chance to push it....

[progt91]

looks good man. take a pic of the spring. how do they look like with the repaint?

[.miKEy.]

they look black... i didnt do the best job only two coats... i'll try and post up a pic tomorrow..

[progt91]

by the way, you are going to need to bend the metal tabs for the front fender inner lining because under hard cornering it will rub against it. just a heads up for you

[.miKEy.]

i tried some tough corners thismorning... no rubs... even hwy on ramps at like 100... still fine, but i'll keep and eye and an ear out for that, thanks

[.miKEy.]

what size tires were you running? 205/40/r17's?

[Mike_Moss]

Rub will depend on tire size and wheel size/offset.

[.miKEy.]

^^ yeah i know, thats why i wanted to know what size tires he had on while using these springs.... cause so far i am in the clear...

[Mike_Moss]

Yeah, I saw, just thought I'd note it as well as the offset & wheel size - often gets overlooked and has more of a bearing than tire size.

[.miKEy.]

yeah good point, i wonder what he was running? progt91... lemmie know what your wheel and tire specs are....mike has got me curious now...

[progt91]

i think its a 40 offset (think) i will have to check it out. they are the same rims as gen1gts. size is 205 40 17. i just bent up those tabs and the problem was solved

[progt91]

glad they are workin out for you

[.miKEy.]

yeah no rubs... except for today, i had 3 guys in the back of my car, plus my box.... bad idea

[progt91]

lol

[viper_707]

stick three girls in the back, then u wont mind a little rubbing going on :D

[.miKEy.]

^^ so true, but in the back of my car, even with 2 people, it just doesnt work out as well as you think.... best way is to push both front seat allllll the way forward.... even then i prefer the hood ;)

[progt91]

man your suppose to sit there and let them do all the work :)