My Custom Interior...

[KDawgONE]

**UPDATED JAN 6-->click HERE! (http://www.sounddomain.com/member_pages/view_page.pl?page_id=279489) for pics!


Well, tonight (Friday) we will be finishing up the sanding on the majority of the parts. We will be painting and clearing tomorrow and hopefully starting to put everything back in Monday. The only shit that wont be going back in yet is the parts that got fibrglassed as they are still rough and we havnt even started finishing them yet.
 For those of you that didnt see my pics at Shoeless, I am hopefully going to get them uploaded for everyone to see this weekend. Later this week, when mostly everything is back in my car, I will get some digi's and post them.
 I wont be able to come up to T.O. to show everyone yet as we have to put my CM clutch in first. My factory clutch is worn so bad I can hardly drive it (not that I have been anyways=no interior). Hopefully we will have a pretty big meet in the next couple of weeks so that I may officially debut my car!
Take care...

[KDawgONE]

Tuesday, Novmeber 26/02...
We replaced the dash into my car. Boy, does it look SWEET!
Tonight, we'll rehook everything up so that it will be drivable. I gots LOTS of pics of the project from start to finish. Just got to get them scanned and then hosted.
We ran out of paint after the dash so we have to get more before I can rplace the door skins, a/b/c pillars, etc. I will have my car for this Sundays Steel Town meet. Check it out. Gen 2, wut!

[MixedAznBoy]

pix please

[KDawgONE]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (MixedAznBoy @ Nov. 27 2002,6:20)</td></tr><tr><td id="QUOTE">pix please[/QUOTE]<span id='postcolor'>
...just got to get them scanned/hosted!

[pasta323]

i can't wait to see this http://msg.toprotege.com/iB_html/non-cgi/emoticons/wow.gif

[Mike_Moss]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (KDawgONE @ Nov. 27 2002,6:22)</td></tr><tr><td id="QUOTE"></span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (MixedAznBoy @ Nov. 27 2002,6:20)</td></tr><tr><td id="QUOTE">pix please[/QUOTE]<span id='postcolor'>
...just got to get them scanned/hosted![/QUOTE]<span id='postcolor'>
msg me if you need space...i can hook a brotha up! http://msg.toprotege.com/iB_html/non-cgi/emoticons/wink.gif

[Mike_Moss]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (pasta323 @ Nov. 28 2002,09:55)</td></tr><tr><td id="QUOTE">i can't wait to see this  http://msg.toprotege.com/iB_html/non-cgi/emoticons/wow.gif[/QUOTE]<span id='postcolor'>
dit-fucking-to! http://msg.toprotege.com/iB_html/non-cgi/emoticons/biggrin.gif

[JTang]

as we are on the topic of custom interior, how to custom paint the interior trim stuff ?

after you have the color on the stuff u want painted ... what else must u do afterwards ? coat it with something? etc ... i'm clueless ...

[KDawgONE]

Use clear coat...probably 3 coats. Do one coat and then wait for it to get tacky before the second coat. Same for third coat. This will make the paint stick and the parts to look shinny!
FYI-->You should ALWAYS prime your parts before you paint them too!

[JTang]

understood : )
thanx KDawg

[pasta323]

ya a couple of us got to see kdawg's interior today at the meet and it's looking good man..great job! http://msg.toprotege.com/iB_html/non-cgi/emoticons/thumbs-up.gif

[Mike_Moss]

YEAH! Kris! that interior is lookin' MIGHTY fine!!! WOW!!! that dash is surely gonna be a showstopper...thanks for reppin' the protege community! its good to see a really well built custom car! hope you like your new oilcap!

[MixedAznBoy]

awww i still wanna see this interior!!! pix PUWWEEASE

[Mike_Moss]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (MixedAznBoy @ Dec. 01 2002,10:59)</td></tr><tr><td id="QUOTE">awww i still wanna see this interior!!! pix PUWWEEASE[/QUOTE]<span id='postcolor'>
stop being a punani and come out to a friggin' meet! http://msg.toprotege.com/iB_html/non-cgi/emoticons/tounge.gif

[7plymaple]

Ya your dash was nutz! Your gonna have the sweetest car in the club! And its a P4! HAHA! BOOYA! http://msg.toprotege.com/iB_html/non-cgi/emoticons/biggrin.gif

[MixedAznBoy]

my legs hurt lol

im so lazy!! and meets r so far! =(

[Mike_Moss]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (MixedAznBoy @ Dec. 02 2002,10:39)</td></tr><tr><td id="QUOTE">my legs hurt lol

im so lazy!! and meets r so far! =([/QUOTE]<span id='postcolor'>
lemme know if you wanna come...you can always ride with another member!!!

[KDawgONE]

**UPDATED JAN 6-->click HERE! (http://www.sounddomain.com/member_pages/view_page.pl?page_id=279489) for pics!

[Gen1GT]

Your car's looking sick K Dawg. Even my friend Nautasha, who is SOOO not into cars says it looks sweet. It's gonna be something else when you get it done. You're car is the opposite of mine http://msg.toprotege.com/iB_html/non-cgi/emoticons/tounge.gif when it comes to interior/exterior work.

[ChopstickHero]

lookin sweet!

3rd gen people... if you're lazy and don't wanna do all that custom work... buy this: http://www.awrracing.com/pages/pro/prodash.html

it's the fibreglass 3rd gen dash! 1.5 pounds!
http://www.awrracing.com/images/dashlg.jpg