HID Install HELP - Missing harness

[P5Pimpin]

Hello Guys,

I purchased the McCulloch Gen 4 HID Kit on ebay.
The only problem is I cannot connect my stock light harness to the HIDs. I'm missing the HID harness. Can someone help me out please. Here are some pictures of what I'm talking about thanks!!!



http://www.dragantech.com/P5/Stock%20wires.JPG
My stock wires

http://www.dragantech.com/P5/Missing%20Harness%20.jpg The Missing Harness


http://www.dragantech.com/P5/Stock%20with%20HID%20Harness.jpg
Both installed

[Brian MP5T]

Autoparts store like Napa or even Canadian Tire.

You could just solder it and shrink wrap it. it would be a better connection.

[ChopstickHero]

do you have pictures of the rest of the kit? i want to see how the bulb and plug fit into the headlight housing. i'm just curious to see if they need to be modded to fit.

[P5Pimpin]

ChopstickHero,

I will take more pictures once I'm finished. It really turned out well. I'm very pleased. The only thing I have to-do other then the harness is adjust my lights. Reading from other peoples issues they had to aim them down where I have to aim my up. I don't see that much of the road ahead compared to the light 5 feet in front of me but I will have to play around with the position.

Brian MP5T,

Thanks for the suggestion I will go and see what they have.

Cheers!

[Brian MP5T]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (P5Pimpin @ Dec. 01 2004,10:38)</td></tr><tr><td id="QUOTE">ChopstickHero,

I will take more pictures once I'm finished. It really turned out well. I'm very pleased. The only thing I have to-do other then the harness is adjust my lights. Reading from other peoples issues they had to aim them down where I have to aim my up. I don't see that much of the road ahead compared to the light 5 feet in front of me but I will have to play around with the position.

Brian MP5T,

Thanks for the suggestion I will go and see what they have.

Cheers![/QUOTE]<span id='postcolor'>
NP, Let me know how it works....

[P5Pimpin]

Brian MP5T,

No luck at CDN Tire or Part Source!
Sucks! I will just soder them togeter and then heat shrink it!

ChopstickHero,
I will get you pictures soon.

Thanks guys

[Brian MP5T]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (P5Pimpin @ Dec. 01 2004,2:12)</td></tr><tr><td id="QUOTE">Brian MP5T,

No luck at CDN Tire or Part Source!
Sucks! I will just soder them togeter and then heat shrink it!

ChopstickHero,
I will get you pictures soon.

Thanks guys[/QUOTE]<span id='postcolor'>
Sorry to hear. The Soldering thing will be better in the long run, Just harder/longer to install...

[P5Pimpin]

Ah crap!
This morning one of my lights went out! @#$@#$@#
Not even a week! How can I determine if its the bulb or the ballest? Any suggestions would be great!

Thanks!