GCPT Winter Rally Mudflaps(TM)?

[CarDemon]

Once again, down here at GCPT(Ghetto Concept Perfomance Trends) I have listened to the legions of customers and fans.

There are many products and individuals out there who may have given the impression that the Winter Rally Mudflaps™ is out there, but down here at GCPT we will confirm it is not out yet. Do not be fooled by the competitors inferior products.

The Winter Rally Mudflaps are in production and are just about ready to be launched. Various prototypes are being vigorously tested in a field type study as I once again want you guys to have the best.

Stay tuned and stay loyal to GCPT products because like one of my slogans say..,"THE SAME STREETS THAT YOU DRIVE ON AND ARE BENEATH YOUR FEET, ARE THE SAME STREETS THAT GOT YO BACK!!!." http://msg.toprotege.com/iB_html/non-cgi/emoticons/sly.gif

[Gen1GT]

I think Jesse might need a set of these...

[MP5Navy]

Micheal.
Do you have any designs in the works? How plain will it be? How bling bling will it be? How rice will it be?

Frankly I am looking for some chromed out mudflaps that will make Hamilton Hoochies double take when I pull into the truck stops.

BTW I check Pacific Mall and they sell mud flaps for ~$50! What a rip off! I am sure to go ghetto with the mud flaps. I look forward to your product hitting the streets Mike.

I you don't get around to it, I surely will if they don't have some of the naked trucker girl mud flaps at Canadian Tire for a resonable cost.

I was thinking that using cheap rubber floor mats (designed for the back seats) could be cut and bolted up in the wheel wells. The real mud flaps seem to be made out of a fairly stiff plastic/rubber and will probably retain its shape better.

[CarDemon]

Hey there Dave!
Down here at GCPT we love joint ventures because we don't claim to have a monopoly on the knowledge. We are constantly seeking more knowledge into making things better for the po man.

We will discuss the various product line approaches?
As for any other TPC member who sees a need out there for your vehicle and it is too expensive, we can put our heads together and make it for a fraction of the cost.

[CarDemon]

For now!
I know black will be the main colour produced!
But I have noticed that the challenge will be in the type of hard rubber or platic used.

I don't want too much flapping around from a flimsy mat, but tractor trailers have some stiff stuff happening. Perhaps I'll camp out at a truck stop while the rednecks sleep and cut off some samples.

I'm also looking at Sport Compact Car back issues to see how Subaru Rally Car's look. How can our P5's or Protege's in general look cool but not ricey or domestically stupid?

[CarDemon]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (Gen1GT @ Oct. 28 2002,1:47)</td></tr><tr><td id="QUOTE">I think Jesse might need a set of these...[/QUOTE]<span id='postcolor'>
Jesse, may need a hockey helmet! http://msg.toprotege.com/iB_html/non-cgi/emoticons/wink.gif

[yellowmp5]

Haha, i bought some MAZDA red rally mud flaps...
guess how much they cost me,
$100 HKD, which is $20 CAD....
do i feel lucky???

[CarDemon]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (mike_moss @ Oct. 29 2002,10:13)</td></tr><tr><td id="QUOTE">Yet another topic we should note for friday's DnB meet.  I am looking forward to these flaps also.[/QUOTE]<span id='postcolor'>
May I suggest the COLDRAM™? Mike
And Also to everyone wishing to discuss a Ghetto Mod but was to shy to even let it out orally. Please come to me and discuss it. I will give you credit if it comes into production and your confidentiality will be kept.

[CarDemon]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (yellowmp5 @ Oct. 29 2002,10:37)</td></tr><tr><td id="QUOTE">Haha, i bought some MAZDA red rally mud flaps...
guess how much they cost me,
$100 HKD, which is $20 CAD....
do i feel lucky???[/QUOTE]<span id='postcolor'>
Hmm!
$20.00 is our price to beat then.

HKD$ Hong Kong Dollars I'm assuming?

Come out to a meet so we can study the construction.

Have you mounted them and how does it look?

[KingKong]

Maybe you should ship a bunch over if shipping isn't expensive!

[yellowmp5]

i didn't mount them yet,
since i am still in HK rite now,
it's hard plastic, RED, but twds the bottom
of the flaps there is a 3&quot; think metal piece,
on the 3&quot; piece metal piece, it's printed MAZDA..

KINGKONG: sorry, mine was the last RED one,
there were some yellow and blue....but i dunno
if ppl really like them....sorry no pics..

[JTang]

what kinda blue or what kinda yellow is it ?
is the blue the laser/mica blue the P5 comes in ? is the yellow the kind of yellow that P5 comes in ??

i'm very interested in a set !!!